**This is an old revision of the document!**

If we consider two points on a turning disc at distance $r_{1}$ and $r_{2}$ from the center of the disc we can make a number of observations.

First the distance traveled by the points is quite different, points that are far from the center go through a greater distance.

However, the angular displacement is the same for both points, suggesting that angular displacement is a good variable to describe the motion of the whole rotating object.

We would like to be able to have a straight forward relationship between the actual distance traveled and the angular displacement, which we can have if we express our angular displacement in radians.

As the relationship between the arc length on a circle and the angle which it subtends in radians is

$l=r\theta$

a change in the angular displacement of $\Delta\theta$ results in a change in the displacement

$\Delta l=r\Delta\theta$

For change in angular displacement $\Delta \theta$ in a time interval $\Delta t$ we can define an average angular velocity

$\bar{\omega}=\frac{\Delta \theta}{\Delta t}$

As we are now accustomed, we can also define an instantaneous velocity

$\omega=\lim_{\Delta t\to 0}\frac{\Delta \theta}{\Delta t}=\frac{d\theta}{dt}$

The units of angular velocity can be expressed as either $\mathrm{rad\,s^{-1}}$ or $\mathrm{s^{-1}}$

Previously we only considered circular motion in which the angular velocity $\omega$ remained constant with time, but of course we can also define an angular acceleration

$\bar{\alpha}=\frac{\Delta \omega}{\Delta t}$

$\alpha=\lim_{\Delta t\to 0}\frac{\Delta \omega}{\Delta t}=\frac{d\omega}{dt}$

The units of angular acceleration can be expressed as either $\mathrm{rad\,s^{-2}}$ or $\mathrm{s^{-2}}$

At the beginning of the course we derived, using calculus, a set of equations for motion under constant acceleration.

$v= v_{0}+at$

$x= x_{0}+v_{0}t+\frac{1}{2}at^2$

$v^{2}=v_{0}^2+2a(x-x_{0})$

We can equally derive similar equations for our rotational quantities. Indeed as we can see that the relationships between the new rotational quantities we have now are exactly the same as those between the translational quantities we can simply rewrite the translational motion equations in terms of rotational variables.

$\omega= \omega_{0}+\alpha t$

$\theta= \theta_{0}+\omega_{0}t+\frac{1}{2}\alpha t^2$

$\omega^{2}=\omega_{0}^2+2\alpha(\theta-\theta_{0})$

A point at distance $r$ from the center of rotation will have at any time a tangential velocity of magnitude

$v=\omega r$

and a tangential acceleration (not to be confused with the centripetal acceleration) of

$a=\alpha r$

Rotational motion, when not accelerated, can be considered to be a form of periodic motion, and so relationships between the angular velocity, frequency and period are useful.

$T=\frac{2\pi}{\omega}$

$f=\frac{\omega}{2\pi}$

$\omega=2\pi f$

We'd also like to be able to express the centripetal acceleration in terms of $\omega$

$a_{R}=\frac{v^{2}}{r}=\frac{(\omega r)^{2}}{r}=\omega^{2}r$

The total acceleration of an object in accelerated rotational motion will be the vector sum of two perpendicular vectors, the tangential acceleration $\vec{a}_{tang}$, and the radial acceleration $\vec{a}_{R}$.

The magnitude of the total acceleration is

$\vec{a}=\sqrt{a_{tang}^2+a_{R}^2}=\sqrt{\alpha^2r^2+\omega^{4}r^2}=r\sqrt{\alpha^2+\omega^4}$

and it is directed an angle

$\arctan\frac{\alpha}{\omega^{2}}$ away from the radial direction.

As we know, translational velocity and acceleration are vector quantities. While we have defined angular velocity and acceleration we can see that they can represent points that are moving in directions that change with time, which would make them difficult to represent with vectors defined in cartesian coordinates.

We can however consider an axial vector, ie. a vector that points in the direction about which rotation occurs as a good way of representing the direction of these rotational quantities.

We give the direction of rotation around the axes according to a right-hand rule.

Let's consider a wheel that rolls without slipping. For an object to roll without slipping there is a frictional requirement; it is actually not possible for an object to roll on a frictionless surface, it would instead slide.

The point around which the wheel turns, which is also it's center of mass, is seen to execute translational motion with velocity $\vec{v}$

In the reference frame of the ground a point on the edge of the wheel comes to rest when it is contact with the ground. However from the perspective of the center of the wheel, the motion of the point of the edge of the wheel is purely rotational with $\omega=\frac{v}{r}$ or $v=\omega r$.

We can describe the displacement of a point on the edge of the wheel in the reference frame of the ground by adding the rotational motion of the point to the translational motion of the center of the wheel. This gives the equation

$\vec{r}=vt\hat{i}+r\cos(\theta(t))\hat{i}+(r\sin(\theta(t))+r)\hat{j}$

$\to \vec{r}=(r\omega t+r\cos(\omega t))\hat{i}+(r\sin(\omega t)+r)\hat{j}$

A path of this kind is called a cycloid

Differentiating with respect to time give us the velocity

$\vec{v}=(r\omega-r\omega(\sin(\omega t)))\hat{i}+r\omega\cos(\omega t)\hat{j}$

More on wheels and rolling at Physclips

In the same way as a force causes linear acceleration, $\vec{F}=m\vec{a}$, there must be an analogous quantity and equation related to angular acceleration. From experience, for example when we use a wrench (or a spanner in civilized parts of the world) we can expect that the angular equivalent of Force, which is called Torque, will depend on the amount of Force applied, the distance at which it is applied and the direction of its application.

We define the torque due to a force $F$ applied at a distance $R$ from a pivot point as either

$\tau\equiv RF_{\perp}$ or $\tau\equiv R_{\perp}F$

and we can calculate the magnitude of the torque using

$\tau=RF\sin\theta$

The units of torque are $\mathrm{Nm}$

You have probably heard of the word torque mostly in the context of car engines.

This animation from How Stuff Works illustrates how the torque on the crankshaft is produced in a 4 stroke engine.

When we talked about torque before we looked at how to calculate it's magnitude. More correctly it is a vector $\vec{\tau}$ that is defined from a cross product of force $\vec{F}$ and the displacement from the center $\vec{r}$

$\vec{\tau}=\vec{r}\times\vec{F}$

The cross product of two vectors $\vec{A}$ and $\vec{B}$ is another vector

$\vec{C}=\vec{A}\times\vec{B}$

The magnitude of the vector $\vec{C}$ is $AB\sin\theta$

The direction of $\vec{C}$ is perpendicular to the plane which contains both $\vec{A}$ and $\vec{B}$. Use of the right hand rule can help you determine this direction.

If we consider the vectors in unit vector notation, $\vec{A}=A_{x}\hat{i}+A_{y}\hat{j}+A_{z}\hat{k}$ and $\vec{B}=B_{x}\hat{i}+B_{y}\hat{j}+B_{z}\hat{k}$ the cross product can be expressed as the determinant of a matrix

$\vec{A}\times\vec{B}=\left| \begin{array}{ccc} \hat{i} & \hat{j} & \hat{k} \newline A_{x} & A_{y} & A_{z} \newline B_{x} & B_{y} & B_{z} \end{array} \right| = \hat{i}\left| \begin{array}{cc} A_{y} & A_{z}\newline B_{y} & B_{z} \end{array} \right| - \hat{j}\left| \begin{array}{cc} A_{x} & A_{z}\newline B_{x} & B_{z} \end{array} \right| + \hat{k}\left| \begin{array}{cc} A_{x} & A_{y}\newline B_{x} & B_{y} \end{array} \right|$

$=(A_{y}B_{z}-A_{z}B_{y})\hat{i}+(A_{z}B_{x}-A_{x}B_{z})\hat{j}+(A_{x}B_{y}-A_{y}B_{x})\hat{k} $

$\vec{A}\times\vec{A}=0$

$\vec{A}\times\vec{B}=-\vec{B}\times\vec{A}$

$\vec{A}\times(\vec{B}+\vec{C})=(\vec{A}\times\vec{B})+(\vec{A}\times\vec{C})$

$\frac{d}{dt}(\vec{A}\times\vec{B})=\frac{d\vec{A}}{dt}\times\vec{B}+\vec{A}\times\frac{d\vec{B}}{dt}$

We now want to look at the relationship between the torque which is applied and the angular acceleration it generates. Let's look at the case of a force $F$ applied at 90 degrees to an object of mass $m$ attached to a pivot point at distance $R$

Newton's second law tells us that

$F=ma$

If we multiply both sides by R we get

$FR=maR$

and by remembering that $a=\alpha R$ we get

$\tau=mR^{2}\alpha$

In an object with a common angular acceleration which consists of many masses at various distances from the center of rotation, each of which may be subject to a torque we can say that

$\sum\limits_{i}\tau_{i}=(\sum\limits_{i} m_{i}R_{i}^{2})\alpha$

As we discussed for forces, different masses can exert internal torques one each, but when summed over all the masses these cancel due to Newton's Third Law, meaning that our sum over all the torques on the masses $\sum\limits_{i}\tau_{i}$ becomes the sum of the external torques $\sum\tau$. We call the quantity $\sum\limits_{i} m_{i}R_{i}^{2}$ the moment of inertia $I$ and write the rotational equivalent of Newton's Second Law as

$\sum \tau=I\alpha$

This equation is valid for a rigid object around a fixed axis (ie. for this to be valid the masses can't move around with respect to the object during the motion as they would if the object was flexible, and the axis must stay in the same position with respect to the masses rotating around it).

We should note that the distance $R$ is the distance of each mass with respect to the axis of rotation, which need not be the center of mass, and is not an intrinsic property of an object!